By Year | By Subject
2022 | 2019 | 2017 | 2015 | 2013 | 2011 | 2009 | 2007 | 2005 | Older
A1 AWIJ Cutting of Structures Made of Magnesium Alloys for the Cardiovascular Surgery
C. Biskup et al
A2 ASJ Singulating Micro SD Cards
S. Jiang
A3 Abrasive-Water Jet Shaping of Bas-Relief
P. Borkowski and A. Szpakowicz
A4 The Accuracy of the Kerf Width Profiles of Facing Slabs and Modernization of Edging Machines for AWJ Cutting
J. Asatryan and Kh. Suvaryan
B1 Cleaning of Heat Transfer Tubes with Automated Water Jets
T. Shawver
B2 Optimizing Flow and Pressure in Waterblast Cleaning
D. Wright and T. Mathis
B3 Effect of Pressure and Stand-off Distance on Mass Removal and Surface Roughness in Paint Stripping with the Waterjet
M.R. Shabgard, H. Teimourian, B. Mutabi, H.V. Tamaddoni and A. Soleimanzadeh
B4 A General Overview of Waterjet Surface Treatment Modeling
A. Chillman, M. Ramulu and M. Hashish
C1 Uncertainty Components Interaction on the Water Jet Velocity Measurement by Laser Velocimetry
M. Annoni, M. Monno and G. Scarano
C2 Study on Downhole Jet Flow Field of High Pressure PDC Bit with Dual-Flow Channel
Z. Wang, L. Xue, X. Wang and Y. Liu
C3 Numerical Simulation of the Formation and Reattachment Length of Water Jet for Different Orifice Geometries
A.T. Basha, M. Annoni and M. Monno
C4 Numerical Simulation of High-Speed Water Jet Flow with Cavitation by a Compressible Mixture Flow Model
G. Pen, S. Shimizu and S. Fujikawa
D1 Configuring a Waterblast System
D. Wright and S. Hardy
D2 Design, Manufacture and Installation of APWSS (Automated Pulsed Waterjet Stripping System)
A. Tieu, W. Yan, B. Daniels, M. Vijay, F.M. Cuneo and M.R. Berezowsky
E1 How to Inspect for Flash Rust
L. Frenzel
E2 Engineering Application fo Ultra High Pressure Water Jet Rust Removal
S. Xue, Z. Chen, Y. Wang, S. Ba and H. Zhu
F1 Jet Assisted Shearer for Cutting the Phosphate at Abu Tartour Deposit (Egypt)
S.I. Youssef
F2 Applications of Self-Excited Pulsed Water Jet in Uncovering Rock Cross Cut Coal of Chinese Coal Mines
Y. Lu, ZS. Ge, X. Li, Y. Liu, S. Zhang and J. Chen
G1 Creating Free Surfaces on Hard Rocks Using Abrasive Suspension Water Jet Manipulators
S. Han and J. Kim
G2 An Experimental Study on Hydraulic Pulsed Cavitation Jet Drilling in Deep Wells
G. Li, H. Shi, Z. Huang, Z. Zhang, F. Luo, Y. Kang, Z. Wu and Y. Nie
G3 Some Advances in Ultrahigh Pressure Jet Assisting Rock-Breaking Technique: Theory and Experiment
Z. Wang, L. Xue, X. Wang and B. Li
H1 Kerf Characterization in Abrasive Waterjet Cutting
J. Zeng and A. Henning
H2 Pulsation of Abrasive Water-Jet
S. Shimizu, T. Ishikawa, A. Saito and G. Peng
H3 Fatigue Performance Enhancement of AWJ-Machined Aircraft Aluminum with Dry-Grit Blasting
H.-T. Liu, T. Gnäupel-Herold, Y. Hovanski and M.E. Dahl
H4 Observations of Titanium Surfaces Impinged with Ultra-High Pressure Waterjets
A. Chillman, M. Ramulu and M. Hashish
I1 Research on the Safety Distance from a Nozzle - Measurement of Safe Standoff Distances of WJ and ASJ
H. Katakura
I2 Water Abrasive Suspension (WAS) Cutting Under Water in Decommissioning Nuclear Power Plants
J. Kleimann
I3 Special AWJ Nozzles
M. Hashish
J1 Quality Issues Associated with Abrasive Waterjet Cutting and Drilling of Advanced Composites
M. Ramulu, I. Hwang and V. Isvilanonda
J2 Comparative Investigation of Abrasive Waterjet Cut Kerf Quality Characteristics for Aramid, Glass and Carbon Fiber Reinforced Composites Used in Transport Aircraft Applications
T. Siddiqui, M. Shukla and P. Tambe
J3 Abrasive Water Jet Milling of Composite Materials: Material Integrity
F. Cénac, M. Déléris, F. Collombet and R. Zitoune